FAQ

You are here:Home >> FAQ

FAQ

Contact us

Contacts: Dyran Liu
Tax:0755-89968500-806
Tel.:0755-89968500
QQ: 1498106739 
Email: support@tronxy.com  
Email: sales@tronxy.com
Address: 601,Building A, Risu industry city, Shengbao Road, Nanwan Street, Longgang District, Shenzhen (518100) China.

FAQ

Lost steps or staggered floor when printing

Time:2018-04-02 Views:1108
Lost steps or staggered floor when printing...
A. Check whether the pulley is not fixed.
B. Check whether the X axis mechanism and Y axis mechanism can move smoothly. Add some oil on the bearing if necessary.
C. Properly adjust the belt tension, too tighter will lead to big movement resistance and too looser lead to slip.
D. Check whether the filament roll can rotate and filament can be fed into the extruder smoothly.
E. Reduce print speed and test again.
F. Belt looseness leads to belt slip. Adjust the tightness of belt properly.
Copyright 2017 © Shenzhen Tronxy Technology Co., LTD. All Rights Reserved Technical Support: Tronxy