FAQ

You are here:Home >> FAQ

FAQ

Contact us

Contacts: Dyran Liu
Tax:0755-89968500-806
Tel.:0755-89968500
QQ: 1498106739 
Email: support@tronxy.com  
Email: sales@tronxy.com
Address: 601,Building A, Risu industry city, Shengbao Road, Nanwan Street, Longgang District, Shenzhen (518100) China.

FAQ

How to solve the unstable extrusion

Time:2018-04-02 Views:1239
How to solve the unstable extrusion...
A. Set to higher extruder temperature and lower print speed and test again.
B. Clean the nozzle and test again.
C. Check whether the filament roll can rotate and filament can be fed into the extruder smoothly.
D. Check if the nozzle is blocked.
E. Layer height is not suitable the nozzle diameter when slicing, recommend layer height is 0.15~0.36mm. The extrusion width shall be within the range of 100%~105% of the nozzle size.
Copyright 2017 © Shenzhen Tronxy Technology Co., LTD. All Rights Reserved Technical Support: Tronxy